For Converting OEM vehicles to Electric Motor Drive or Custom Electric Vehicles
Full Manual Valvebody with Forward Shift Pattern
Standard Shift Pattern - 1-2-3-N-R
Dyno tested Unit comes complete with Installtion instructions
Note: No TV cable is required
Higher Torque and Thrust Capacity
Significant Slippage Reduction
Full flow oil circulation
Forward Shift Pattern only
Custom Valvebody Calibration for Instant Response
Modified Input Shaft (non-lock-up)
Hi-capacity Thrust Washers
Heavy duty Clutch Packs & Hi energy Band
|-LB||Shift Lever & Bracket Kit (for Aftermarket Shifters)||$125.00||$149.00
|-ADP||Billet Alum Adapter Plate - Elec. Motor to AOD/AODE bellhousing||$1,034.00||$1,217.00
|-HHP5||High HP Modification - Oversized 300M Direct Drum Assy||$725.00||$853.00
|-FP3||153th Flexplate (0 balance)||$99.00||$116.00
|-YK2||H.D. Billet yoke (large O.D.)||$175.00||$200.00
|-CP2||Machined Billet Steel Rigid Coupler w/TH400 Internal Spline||$598.00||$703.00
|-DS||Dip Stick & Tube (cadmium plated w/ locking top - specify engine)||$69.00||$81.00
|-GS||HD Wide Ratio Gear Set (2.84/1.56/1.00/0.70)||$598.00||$703.00
|-CP||Machined Billet Steel Rigid Coupler & Taper-Loc Bushing||$494.00||$581.00
Heavy Duty AO3 (AOD) for Electric Motors
Fill out the "Converter Application Form" to determine correct converter size &
stall rpm. All transmissions with converters and related equipment will ship by
Freight in a special container.
|10"||Street - Heavy Duty Low Stall (non l/u)||500 - 800 RPMs||425||375||$495.00||$582.00
What kind of transmission fluid should I use?
For Street and Street/Strip applications we only recommend the use of Ford type "F" Transmission fluid. For Extreme Duty applications we only recommend the use of ULX-110 type fluid. Both of these fluids are natural Petrolium based. Both of these fluids contain zinc which is the primary additive for proper lubrication for high performance transmissions. We do not recomend synthetic transmission fluids.
How much transmission fluid does my transmission take?
The transmission and torque convertor can take anywhere from 9 to 13 quarts of fluid. Most of the fluid is contained in the torque convertor. After installation of the transmission and convertor is complete, pour (4-5) quarts of transmission fluid into the transmission. Then place transmission into neutral, start engine, and quickly add transmission fluid until it reaches the full mark (pan rail level on most applications) on the dipstick. Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick. For more details follow link. http://www.fbperformance.com/NewSite/page.asp?get=14&t=Bottom2
Why is the automatic transmission generally perfered over a stick shift transmission?
From a convenience stand point, most high performance automatic transmissions have the ability to be shifted manually or automatically. From an efficiency standpoint, today’s automatic transmissions incorporate a more efficient torque converter that is specifically built for each application. These torque converters have the ability to multiply the engines torque during the stall phase. A clutch on the other hand, simply is along for the ride by connecting the engines power to drive-line. All converters also have a built-in fluid dampening feature. For the higher horsepower applications the automatic transmission and converter combination is more often than not more durable and reliable than the clutch and standard gear box combination. We’ve found when doing conversions from stick to automatic in high performance vehicles that these cars generally drop from a half to three quarters of a second in elapsed time in the quarter mile.