Application
For Tow vehicles, 4x4's, etc.,
Factory automatic typ shift pattern with manual hold
Final unit calibration is based upon rear axle ratio in use
For proper operation TV must be proberly installed and adjusted
Unit comes complete with general installation instructions
Features
-
Hi-Capacity Filter
-
Improved Oil Circulation
-
Retains Lock-up Configuration
-
Improved Slippage Reduction
Competition Components
-
Standard Dual Input Shaft (lock-up)
-
OEM Servo Assembly
-
Standard Clutch Packs
-
OEM Overdrive Band
Options
-LB | Shift Lever & Bracket Kit (for Aftermarket Shifters) | $143.75 | $171.35 |
-DS | Dip Stick & Tube (cadmium plated w/ locking top - specify engine) | $79.35 | $93.15 |
-FP | 164th Flexplate (specify engine balance, 0, 28 or 50oz.) | $143.75 | $158.70 |
-GS | HD Wide Ratio Gear Set (2.84/1.56/1.00/0.70) | $687.70 | $808.45 |
-AP | SFI Bellhousing Adapter kit & modified front pump for Ford FE blk | $951.05 | $1,117.80 |
-BK-M | SFI Bellhousing adapter kit ....Mopar (includes flexplate, crank pilot, modified Front pump) | $891.25 | $978.65 |
-RV | Recalibrated Valve Body - Shift Kit | $224.25 | $263.35 |
-CK | Cross-member Adapter Kit (Early Mustang 65-73) | $209.30 | $246.10 |
-AKY | Adapter Kit - Ford/Mopar to - Ford "Y" blk (54'-63') / Flat-head (49'-53') or Early Mopar SB (incl. Adapter plate, 164th Flexplate, crank pilot) - Mini-starter Additional | $951.05 | $1,117.80 |
-TVB | Throttle Pressure Shift (TV) Cable and Accelerator Bracket | $119.60 | $141.45 |
-BK-F | SFI Bellhousing Adapter Kit-BB & Mod Ford/GM (incl. mod. front pump) | $645.15 | $759.00 |
-YK1 | H.D. Billet C-4 Yoke | $172.50 | $201.25 |
Pricing
HD11104-S-LU |
Core Charge:
$218.00
| $1,503.11 | $1,662.25 |
Order Notes
Fill out the "Converter Application Form" to determine correct converter size &
stall rpm. All transmissions with converters and related equipment will ship by
Freight in a special container.
Converters
11" | Towing HD Low Stall (l/u and non l/u) | 1200 - 1600 RPMs | 400 | 375 | $687.70 | $808.45 |
12" | Towing HD Low Stall (l/u and non l/u) | 1300 - 1700 RPMs | 300 | 280 | $388.70 | $456.55 |
12" | Stock (l/u and non l/u) | 1500 - 1800 RPMs | 275 | 225 | $353.05 | $415.15 |
12" | Street (l/u or non l/u) | 2000 - 2400 RPMs | 375 | 350 | $448.50 | $527.85 |
What kind of transmission fluid should I use?
For Street and Street/Strip applications we only recommend the use of Ford type "F" Transmission fluid. For Extreme Duty applications we only recommend the use of ULX-110 type fluid. Both of these fluids are natural Petrolium based. Both of these fluids contain zinc which is the primary additive for proper lubrication for high performance transmissions. We do not recomend synthetic transmission fluids.
How much transmission fluid does my transmission take?
The transmission and torque convertor can take anywhere from 9 to 13 quarts of fluid. Most of the fluid is contained in the torque convertor. After installation of the transmission and convertor is complete, pour (4-5) quarts of transmission fluid into the transmission. Then place transmission into neutral, start engine, and quickly add transmission fluid until it reaches the full mark (pan rail level on most applications) on the dipstick. Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick. For more details follow link. http://www.fbperformance.com/NewSite/page.asp?get=14&t=Bottom2
Why is the automatic transmission generally perfered over a stick shift transmission?
From a convenience stand point, most high performance automatic transmissions have the ability to be shifted manually or automatically. From an efficiency standpoint, today’s automatic transmissions incorporate a more efficient torque converter that is specifically built for each application. These torque converters have the ability to multiply the engines torque during the stall phase. A clutch on the other hand, simply is along for the ride by connecting the engines power to drive-line. All converters also have a built-in fluid dampening feature. For the higher horsepower applications the automatic transmission and converter combination is more often than not more durable and reliable than the clutch and standard gear box combination. We’ve found when doing conversions from stick to automatic in high performance vehicles that these cars generally drop from a half to three quarters of a second in elapsed time in the quarter mile.