Share:

Pro Max Ultra Glide w/TB . . Stage- 4

Maximum HP Rating: 1800
Maximum Torque Rating 1600
Standard Gear Ratio: 1.80/1.00
Optional Gear Ratio: 1.69/1.00

Application

Built for all out race cars
(Pro Mod,Top Sportsman,Super Comp, Outlaw Pro Street, etc.)
Full Manual "Forward" Shift Pattern
Complete unit comes with installation instructions

Features

  • Forward Shift Pattern only
  • Quick Shift Operation
  • Specially lined Racing Band & Clutches
  • Maximum oil circulation
  • Reverse Safety Feature is included for Trans-Brake
  • Hi-Capacity Filter
  • Trans-brake permits Max stall speed and has Instant release
  • Boosted Line-pressure with teflon sealing rings
  • Maximum Torque and Thrust Capacity

Competition Components

  • Billet alum dual-ring Servo w/ high pressure sealing rings
  • Super Pump & machined Stator w/"unbreakable" forged steel gears
  • Deep pan and Filter Extension
  • Built w/best Pro-Trans-brake w/fluid exhaust
  • Custom High Gear Drum for holding (10) Oversized Extreme duty frictions
  • Vasco Alloy Oversized "Ringless" input shaft - for Turbo Stator and splines.
  • Steel Clutch hub
  • Specially lined Racing Band and Clutches
  • External Transbrake with electric activation and ultra quick release
  • Competition Hi-flow Manual Valve-body & High Pressure Regulator
  • Hi-Impact 9310 straight cut 1.80 Planetary gear set w/alloy output shaft

Options

OptionDescriptionRacer NetList Price
-APVDodge Viper to GM Adapter Kit - Incl. Adapter Plate, SFI Flexplate, Crankshaft Pilot & Hardware (All except 03' & 04')$2,387.00$2,808.00
-OS300M Output Shaft and steel carrier assembly$619.00$728.00
-BLSFI Bellhousing- installed for GM$338.00$397.00
-VSCVariable Stall Control$1,034.00$1,217.00
-TSTransmission Shield - installed$234.00$276.00
-CASSFI Case housing only & SFI pan - installed$857.00$1,009.00
-SC2SuperGlide 2-Pc Case w/internal shield - SFI approved (Fits BB/SB Ford)$1,170.00$1,377.00
-DSDip Stick & Tube (cadmium plated w/ locking top - specify engine)$69.00$81.00
-BKSFI Bellhousing Adapter Kit- Ford (includes flexplate and crank pilot)$702.00$826.00
-STShorty output assembly w/Billet Alum. Cover w/precision roller bearing$389.00$458.00
-RTRoller tail-housing for Super Case$203.00$239.00
-AFPSFI adapter flexplate and crank pilot for use w/SFI bellhousing$338.00$397.00
-AKCNC Adapter Ring - GM to Ford...w/flexplate & crank pilot (Specify engine size & balance)$567.00$667.00
-ESElectric 1-2 shift Valve body (Eliminates air shifter - Shifts on chip output signal)$367.00$432.00
-GSSt. cut ExDty 9310 Low gear planetary set (1.69)$0.00$0.00
-SCSuperGlide Case w/internal shield - SFI approved$988.00$1,163.00

Pricing

Part Number Racer NetList Price
CB14004-9-DP

Pro Max Ultra Glide w/TB . . Stage- 4

Core Charge: $200.00
$3,995.00$4,700.00


Order Notes

Fill out the "Converter Application Form" to determine correct converter size & stall rpm. All transmissions with converters and related equipment will ship by Freight in a special container.

Converters

SizeConverter TypeStall RangeMax HorsepowerMax TorqueRacer NetList Price
8"Extreme Duty3500 - 8000 RPMs1200950$1,196.00$1,407.00
11"Extreme Duty2800 - 4500 RPMs28002200$1,764.00$2,075.00
9"Extreme Duty - Bolt Together4000 - 6000 RPMs15001200$1,971.00$2,319.00
10"Extreme Duty - Bolt Together3000 - 5000 RPMs25002000$2,077.00$2,444.00
11"Extreme Duty - Bolt Together2800 - 4500 RPMs28002200$2,387.00$2,808.00
9"Extreme Duty4000 - 6000 RPMs15001200$1,243.00$1,462.00
9"Extreme Duty..(Turbo/Super Appl)3000 - 6000 RPMs15001200$1,348.00$1,586.00
10"Extreme Duty3000 - 5000 RPMs25002000$1,556.00$1,830.00
13"Extreme Duty2800 - 4000 RPMs28002400$1,764.00$2,075.00

What kind of transmission fluid should I use?

For Street and Street/Strip applications we only recommend the use of Ford type "F" Transmission fluid. For Extreme Duty applications we only recommend the use of ULX-110 type fluid. Both of these fluids are natural Petrolium based. Both of these fluids contain zinc which is the primary additive for proper lubrication for high performance transmissions. We do not recomend synthetic transmission fluids.

How much transmission fluid does my transmission take?

The transmission and torque convertor can take anywhere from 9 to 13 quarts of fluid. Most of the fluid is contained in the torque convertor. After installation of the transmission and convertor is complete, pour (4-5) quarts of transmission fluid into the transmission. Then place transmission into neutral, start engine, and quickly add transmission fluid until it reaches the full mark (pan rail level on most applications) on the dipstick. Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick. For more details follow link. http://www.fbperformance.com/NewSite/page.asp?get=14&t=Bottom2

Why is the automatic transmission generally perfered over a stick shift transmission?

From a convenience stand point, most high performance automatic transmissions have the ability to be shifted manually or automatically. From an efficiency standpoint, today’s automatic transmissions incorporate a more efficient torque converter that is specifically built for each application. These torque converters have the ability to multiply the engines torque during the stall phase. A clutch on the other hand, simply is along for the ride by connecting the engines power to drive-line. All converters also have a built-in fluid dampening feature. For the higher horsepower applications the automatic transmission and converter combination is more often than not more durable and reliable than the clutch and standard gear box combination. We’ve found when doing conversions from stick to automatic in high performance vehicles that these cars generally drop from a half to three quarters of a second in elapsed time in the quarter mile.