Share:

Pro Competition AO3 (AOD) - Stage 1 (big blk except FE)

Maximum HP Rating: 900
Maximum Torque Rating 750
Standard Gear Ratio: 2.40/1.47/1.00
Optional Gear Ratio: 2.84/1.56/1.00

Application

Built for hi-performance Street/Strip vehicles and off-road applications.
Designed as a Direct Upgrade to Replace the C-4 or C-6 units
Easily adapted to most rear-wheel drive vehicles 
Full-manual "forward" shift pattern - only
Complete Installation instructions included

http://www.fbperformance.com/page.asp?get=23&t=Top2
 

Features

  • Full flow oil circulation
  • Quick Shift Operation
  • Hi-Capacity Filter
  • Trans-brake (optional) permits Max stall speed and has Instant release for full tree
  • Forward Shift Pattern only
  • Maximum Torque and Thrust Capacity
  • Reverse Safety Feature is included for Trans-Brake

Competition Components

  • Large Servo Assembly
  • Modified Front Pump Assembly w/Teflon Rings
  • Competition Hi-flow Manual Valve-body & High Pressure Regulator
  • Heavy Duty Intermediate Mech. Diode Assembly
  • (Optional) Internal Transbrake with electric activation
  • Solid 300M (non-lock-up) Input Shaft
  • High Performance Clutch Packs
  • SFI Adapter Bellhousing included
  • Ultra-light Stamped Steel Drum Assemblies

Options

OptionDescriptionRacer NetList Price
-DSDip Stick & Tube (cadmium plated w/ locking top - specify engine)$69.00$81.00
-BK-FSFI Bellhousing Adapter Kit-BB & Mod Ford/GM (incl. mod. front pump)$561.00$660.00
-YK1H.D. Billet C-4 Yoke$150.00$175.00
-FP164th Flexplate (specify engine balance, 0, 28 or 50oz.)$125.00$138.00
-HHP3High HP Modification - 300M Direct Drum Assy$514.00$605.00
-TSTransmission Shield - installed$234.00$276.00
-FPSSFI 164 tooth Flexplate (specify balance-0, 28 or 50)...(specify 6 or 8 bolt hole crankshaft)$234.00$276.00
-DPDeep (alum.) Pan & Filter extension$191.00$225.00
-TBTrans-brake feature added to full manual valve body$210.00$246.00
-APSFI Bellhousing Adapter kit & modified front pump for Ford FE blk$827.00$972.00
-AFPSFI adapter flexplate and crank pilot for use w/SFI bellhousing$338.00$397.00
-HHP5High HP Modification - Oversized 300M Direct Drum Assy$725.00$853.00
-YK2H.D. Billet yoke (large O.D.)$175.00$200.00
-CKCross-member Adapter Kit (Early Mustang 65-73)$182.00$214.00
-LBShift Lever & Bracket Kit (for Aftermarket Shifters)$125.00$149.00
-MRInternal Rotating Mass Reduction Package - (Super Stock applications)$862.00$1,014.00
-VSCVariable Stall Control$1,034.00$1,217.00
-CNAOD to AO3 Conversion - 4WD$99.00$116.00
-GS3HD Wide Ratio Gear Set (2.84/1.56/1.00)$598.00$703.00

Pricing

Part Number Racer NetList Price
CB13103-S1-BL

Pro Competition AO3 (AOD) - Stage 1 (big blk except FE)

Core Charge: $200.00
$2,095.00$2,465.00


Order Notes

Fill out the "Converter Application Form" to determine correct converter size & stall rpm. All transmissions with converters and related equipment will ship by Freight in a special container.

Converters

SizeConverter TypeStall RangeMax HorsepowerMax TorqueRacer NetList Price
10"Street Strip2400 - 3800 RPMs650575$827.00$972.00
10"Full Race2800 - 5000 RPMs900750$987.00$1,169.00
8"Full Race3500 - 7000 RPMs1000900$1,116.00$1,163.00
8"Full Race w/Mech Diode3500 - 7000 RPMs1000900$1,299.00$1,529.00
10"Full Race (single disc) L/U - activated in OD or Top of 3rd Gear2800 - 5000 RPMs1000900$1,243.00$1,462.00
9"Full Race4000 - 6000 RPMs1000900$1,034.00$1,217.00

What kind of transmission fluid should I use?

For Street and Street/Strip applications we only recommend the use of Ford type "F" Transmission fluid. For Extreme Duty applications we only recommend the use of ULX-110 type fluid. Both of these fluids are natural Petrolium based. Both of these fluids contain zinc which is the primary additive for proper lubrication for high performance transmissions. We do not recomend synthetic transmission fluids.

How much transmission fluid does my transmission take?

The transmission and torque convertor can take anywhere from 9 to 13 quarts of fluid. Most of the fluid is contained in the torque convertor. After installation of the transmission and convertor is complete, pour (4-5) quarts of transmission fluid into the transmission. Then place transmission into neutral, start engine, and quickly add transmission fluid until it reaches the full mark (pan rail level on most applications) on the dipstick. Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick. For more details follow link. http://www.fbperformance.com/NewSite/page.asp?get=14&t=Bottom2

Why is the automatic transmission generally perfered over a stick shift transmission?

From a convenience stand point, most high performance automatic transmissions have the ability to be shifted manually or automatically. From an efficiency standpoint, today’s automatic transmissions incorporate a more efficient torque converter that is specifically built for each application. These torque converters have the ability to multiply the engines torque during the stall phase. A clutch on the other hand, simply is along for the ride by connecting the engines power to drive-line. All converters also have a built-in fluid dampening feature. For the higher horsepower applications the automatic transmission and converter combination is more often than not more durable and reliable than the clutch and standard gear box combination. We’ve found when doing conversions from stick to automatic in high performance vehicles that these cars generally drop from a half to three quarters of a second in elapsed time in the quarter mile.