Share:

Pro Competition AO3 (AOD) - Stage 2 (modular block)

Maximum HP Rating: 1200
Maximum Torque Rating 950
Standard Gear Ratio: 2.40/1.47/1.00
Optional Gear Ratio: 2.84/1.56/1.00

Application

Built for all -out racing- drag, etc., & limited Street use
Designed as a Direct Upgrade to Replace the C-4 or C6 units
Easily adapted to most rear-wheel drive vehicles
Full-manual "forward" shift pattern - only
Complete unit comes with general installation instructions.

Features

  • Reverse Safety Feature is included for Trans-Brake
  • Quick Shift Operation
  • Maximum Torque and Thrust Capacity
  • Maximum oil circulation
  • Special Valve Body circuit for greater Hi-Gear, HP capacity
  • Forward Shift Pattern only
  • Trans-brake (optional) permits Max stall speed and has Instant release for full tree
  • Hi-Capacity Filter

Competition Components

  • Competition Clutch Packs Modified for additional Frictions
  • Large Servo Assembly
  • High HP - 300M Direct Drum Assy
  • SFI Adapter Bellhousing included
  • Ultra-light Stamped Steel Drum Assemblies
  • Solid 300M (non-lock-up) Input Shaft
  • Heavy Duty Intermediate Mech. Diode Assembly
  • Modified Front Pump Assembly w/Teflon Rings
  • (Optional) Internal Transbrake with electric activation
  • Competition Hi-flow Manual Valve-body & High Pressure Regulator

Options

OptionDescriptionRacer NetList Price
-DSDip Stick & Tube (cadmium plated w/ locking top - specify engine)$69.00$81.00
-TSTransmission Shield - installed$234.00$276.00
-TBTrans-brake feature added to full manual valve body$210.00$246.00
-CBCross-member Bracket and Trans mount (05' and up Mustangs)$150.00$175.00
-APSFI Bellhousing Adapter kit & modified front pump for Ford FE blk$827.00$972.00
-VSCVariable Stall Control$1,034.00$1,217.00
-BK-FSFI Bellhousing Adapter Kit-BB & Mod Ford/GM (incl. mod. front pump)$561.00$660.00
-GS3HD Wide Ratio Gear Set (2.84/1.56/1.00)$598.00$703.00
-AFPSFI adapter flexplate and crank pilot for use w/SFI bellhousing$338.00$397.00
-MRInternal Rotating Mass Reduction Package - (Super Stock applications)$862.00$1,014.00
-HHP5High HP Modification - Oversized 300M Direct Drum Assy$725.00$853.00
-CNAOD to AO3 Conversion - 4WD$99.00$116.00
-LBShift Lever & Bracket Kit (for Aftermarket Shifters)$125.00$149.00
-DPDeep (alum.) Pan & Filter extension$191.00$225.00
-YK1H.D. Billet C-4 Yoke$150.00$175.00
-YK2H.D. Billet yoke (large O.D.)$175.00$200.00
-FPSSFI 164 tooth Flexplate (specify balance-0, 28 or 50)...(specify 6 or 8 bolt hole crankshaft)$234.00$276.00

Pricing

Part Number Racer NetList Price
CT12203-S-00
Pro Competition AO3 (AOD) - Stage 2 (modular block)
Core Charge: $200.00
$2,995.00$3,523.00


Order Notes

Fill out the "Converter Application Form" to determine correct converter size & stall rpm. All transmissions with converters and related equipment will ship by Freight in a special container.

Converters

SizeConverter TypeStall RangeMax HorsepowerMax TorqueRacer NetList Price
8"Full Race w/Mech Diode3500 - 7000 RPMs1000900$1,299.00$1,529.00
10"Full Race2800 - 5000 RPMs900750$987.00$1,169.00
8"Full Race3500 - 7000 RPMs1000900$1,116.00$1,163.00
9"Full Race4000 - 6000 RPMs1000900$1,034.00$1,217.00
9"Extreme Duty..(Turbo/Super Appl)3000 - 6000 RPMs15001200$1,348.00$1,586.00
9"Extreme Duty4000 - 6000 RPMs15001200$1,243.00$1,462.00
10"Extreme Duty3500 - 5000 RPMs15001200$1,347.00$1,585.00
8"Extreme Duty w/Mech Diode3500 - 8000 RPMs12001000$1,502.00$1,768.00
8"Extreme Duty3500 - 7000 RPMs12001000$1,196.00$1,407.00

What kind of transmission fluid should I use?

For Street and Street/Strip applications we only recommend the use of Ford type "F" Transmission fluid. For Extreme Duty applications we only recommend the use of ULX-110 type fluid. Both of these fluids are natural Petrolium based. Both of these fluids contain zinc which is the primary additive for proper lubrication for high performance transmissions. We do not recomend synthetic transmission fluids.

How much transmission fluid does my transmission take?

The transmission and torque convertor can take anywhere from 9 to 13 quarts of fluid. Most of the fluid is contained in the torque convertor. After installation of the transmission and convertor is complete, pour (4-5) quarts of transmission fluid into the transmission. Then place transmission into neutral, start engine, and quickly add transmission fluid until it reaches the full mark (pan rail level on most applications) on the dipstick. Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick. For more details follow link. http://www.fbperformance.com/NewSite/page.asp?get=14&t=Bottom2

Why is the automatic transmission generally perfered over a stick shift transmission?

From a convenience stand point, most high performance automatic transmissions have the ability to be shifted manually or automatically. From an efficiency standpoint, today’s automatic transmissions incorporate a more efficient torque converter that is specifically built for each application. These torque converters have the ability to multiply the engines torque during the stall phase. A clutch on the other hand, simply is along for the ride by connecting the engines power to drive-line. All converters also have a built-in fluid dampening feature. For the higher horsepower applications the automatic transmission and converter combination is more often than not more durable and reliable than the clutch and standard gear box combination. We’ve found when doing conversions from stick to automatic in high performance vehicles that these cars generally drop from a half to three quarters of a second in elapsed time in the quarter mile.